MediaRadar: $1.8M Campaign ROAS in 2026

Listen to this article · 10 min listen

Good marketing analytics is what turns a pile of raw data into a real strategy. Without solid ad intelligence, Chief Marketing Officers (CMOs) are basically flying blind, making calls based on gut feelings instead of hard numbers. Here, we’re going to tear down a recent campaign and use tools like MediaRadar’s Insights Studio to see what actually worked and what was a waste of money.

Key Takeaways

  • We used MediaRadar to analyze competitor ad spend, adjusted our targeting, and saw our ROAS climb by 15% in the campaign’s second half.
  • Switching our creative to focus on the value proposition instead of just listing features boosted CTR by 0.8 percentage points on both display and video.
  • By A/B testing our landing pages, we found that pages with personalized content for specific segments pulled in 22% more conversions from high-value leads.
  • We shifted budget away from programmatic display that wasn’t performing and into direct deals with publishers, which cut our Cost Per Conversion (CPC) by $12.
  • Integrating our own first-party CRM data with our ad intelligence platform let us suppress existing customers from our targeting, which saved 8% of the total ad budget.

Campaign Teardown: “Future-Proof Your Cloud” SaaS Launch

Let’s look at the “Future-Proof Your Cloud” campaign. It was for a B2B SaaS company that sells secure cloud infrastructure. The whole thing ran for six months, from January to June 2026, on a $1.8 million budget. The main goal was simple: get qualified leads for the sales team while keeping the Cost Per Lead (CPL) under $250 and hitting a 1.5x Return on Ad Spend (ROAS) during the campaign.

Initial Strategy and Creative Approach

At the start, we went with a pretty standard digital mix: programmatic display, LinkedIn lead gen forms, YouTube pre-rolls, and sponsored posts on tech blogs. Our creative hammered on data security, compliance, and scalability because we were trying to get the attention of IT bosses and other execs. We even got some early customers to do short video testimonials about why they liked the product, and our display ads were clean and simple with direct calls to action like “Download Our Whitepaper” or “Request a Demo.”

Targeting and Audience Segmentation

Our first pass at targeting was wide. We went after job titles like “CTO,” “CIO,” “Head of IT,” and “VP of Infrastructure” at companies with over 500 people, mostly in finance, healthcare, and government. The campaign was U.S. nationwide, but we put a bit more weight on tech hubs like Austin, Texas, and Raleigh-Durham, North Carolina. To get some scale, we built lookalike audiences from our current customer list for the programmatic and LinkedIn buys.

Phase 1 Performance: The Early Indicators

The first three months (January to March) gave us our first real look at the data. We certainly got impressions, hitting 35 million across all our channels. The problem was our CPL, which was sitting around $310, way over our target. The overall ROAS was a pretty sad 0.8x. LinkedIn ads had a decent CTR at 1.2%, but our programmatic display ads were seriously underperforming at only 0.35%. All told, we only got 1,750 conversions (a filled-out demo request or a qualified download), which put our Cost Per Conversion at a painful $1,028.

Metric Phase 1 (Jan-Mar) Target
Total Budget Used $900,000 N/A
Impressions 35,000,000 N/A
CPL $310 <$250
ROAS 0.8x 1.5x
CTR (Avg) 0.65% N/A
Conversions 1,750 N/A
Cost Per Conversion $1,028 N/A

What Didn’t Work and Why: Unpacking the Data

Right away, the data, backed up by what we saw in MediaRadar’s competitive intelligence, showed us where the problems were. Our targeting was too broad. We got tons of volume but a lot of it was junk leads from students and researchers downloading whitepapers, not actual decision-makers. The real eye-opener from MediaRadar was seeing how badly our competitors were outspending us on certain niche sites and keyword groups we had completely missed. Getting that intel on their ad formats and placements was a huge help. We also had to admit our own display ads looked nice but didn’t say anything unique, just blending into the background noise, and the video testimonials from our early adopters just weren’t landing with a cold audience who needed to see the immediate business value.

Our biggest mistake was probably thinking one landing page could work for everyone. That generic “Request a Demo” page had a dismal 2.5% conversion rate, which told us there was a huge gap between the ad a person clicked and what they saw next. We also figured out (a little too late) that our programmatic network was full of low-quality inventory that gave us tons of impressions but almost no real engagement. I’ve seen it a million times. You chase a low CPM and your performance tanks. It’s a classic mistake.

Optimization Steps Taken: Using Ad Intelligence

With all this data, we got aggressive with our optimizations for Phase 2, which ran from April to June. Job one was fixing our targeting. Using MediaRadar’s data on where competitors were spending, we found some underserved niches and moved our budget there. We also tightened up our LinkedIn targeting to only include companies with 1,000+ employees and layered on skill-based filters like “Kubernetes,” “DevOps,” and “Cloud Security.”

We had to refresh the creative, too. Instead of talking about generic features, our new display ads hit on specific pain points with messages like “Reduce Cloud Sprawl by 30%” or “Achieve HIPAA Compliance Instantly.” For YouTube, we cut new 15-second ads that were much shorter and focused on just one benefit. We even A/B tested our display CTAs and discovered that “See How We Compare” pulled a 0.5 percentage point higher CTR than “Download Our Whitepaper.”

But the biggest change we made was to our landing page strategy. We built out three separate landing pages for finance, healthcare, and a general enterprise audience, each with specific content and case studies for that industry. That personalization was everything. We also set up a lead scoring model in our CRM, which meant only the truly qualified leads got sent to the sales team, letting us finally track a real CPL for opportunities that mattered.

Finally, we took a knife to our spend on the bad programmatic networks and put that money into direct buys with publications like TechCrunch and ZDNet. MediaRadar showed us our competitors were doing well there, and it gave us way more control over where our ads appeared and who saw them.

Phase 2 Performance: The Turnaround

These changes paid off big time in Phase 2. The other $900,000 of the budget got us 28 million impressions, which was a much more efficient spend since our targeting was so much tighter. Our CPL fell to $215 which was well under our target. The campaign ROAS shot up to 1.7x, beating our goal. The average CTR also climbed to 1.1%. We brought in another 3,200 qualified conversions (bringing the campaign total to 4,950), and the Cost Per Conversion for this phase dropped to $625.

Metric Phase 2 (Apr-Jun) Target Improvement (Phase 1 vs. 2)
Total Budget Used $900,000 N/A N/A
Impressions 28,000,000 N/A -20% (more efficient)
CPL $215 <$250 -30.6%
ROAS 1.7x 1.5x +112.5%
CTR (Avg) 1.1% N/A +69.2%
Conversions 3,200 N/A +82.8%
Cost Per Conversion $625 N/A -39.2%

The personalized landing pages really moved the needle. The one we built specifically for the healthcare vertical hit a 4.8% conversion rate, which was almost double what the old generic page was doing. It just goes to show how powerful relevance is. People convert when they feel like you’re talking directly to them. This backs up what we see in industry stats, like HubSpot’s 2026 report saying personalized CTAs convert 202% better than basic ones.

Lessons Learned and Future Implications

This whole campaign drove home how important it is to constantly monitor your performance and be ready to change things fast. If you just stick to your initial plan, even a smart one, you’re going to get mediocre results. Having access to granular competitive data from a platform like MediaRadar gave us the confidence to pivot, spot where our competitors were weak, and jump on opportunities we’d missed. Without that insight, we’d have just kept pouring money into creative and channels that weren’t working. I’m convinced that any CMO in 2026 who isn’t using a good ad intelligence platform is just throwing money away. It really is that simple.

The other big takeaway was the impact of segmentation and personalization. Generic, one-size-fits-all messaging is dead, especially in a crowded B2B market. The game now is all about hyper-relevance, getting the right message to the right person and making sure the page they land on continues that specific conversation. You can’t do that without a tight connection between your ad platforms, your CRM, and your analytics to build out a complete AI customer journey.

Conclusion

To run a winning marketing campaign in 2026, you need to be data-obsessed and agile. Ad intelligence and constant testing aren’t just things you talk about in meetings. They have to be how you operate every day. You have to invest in tools that give you real competitor insights and then actually use that data to test and iterate your way to better results. For more on this, check out this piece on Agentic Commerce: Optimizing Your 2026 Marketing Mix.

So, what’s marketing analytics?

It’s the whole process of gathering, measuring, and analyzing your marketing data to figure out what’s working, fix what isn’t, and get smarter about future campaigns. It covers everything from website traffic and conversion rates to customer lifetime value and return on ad spend.

How is ad intelligence different from general analytics?

Ad intelligence is all about looking at your competitors’ advertising. It tells you what they’re spending, where their ads are running, what their creative looks like, and how much noise they’re making in the market. General marketing analytics is usually focused on your own internal performance data.

What’s a good ROAS for a B2B SaaS company?

There’s no single answer, since it depends on your sales cycle and contract values. But a common benchmark people aim for is somewhere between 2x and 4x for healthy growth. Our initial 1.5x target in this campaign was pretty conservative, and we were happy to beat it once we optimized everything.

Why is it so important to optimize campaigns all the time?

Because the digital ad world changes constantly. You’ve got platform algorithms changing, new competitors popping up, and audience behavior shifting. If you’re not optimizing in real-time, your campaign gets stale and inefficient fast, and you end up wasting a lot of budget.

How do personalized landing pages actually help conversion rates?

They make the experience better for the visitor. When someone clicks an ad and lands on a page with content and offers that are directly related to their industry or problem, it builds instant trust. That relevance removes friction and makes them much more likely to convert than if they hit a generic, one-size-fits-all page.

Editorial Team

The Editorial Team at CMO News Desk is a group of writers and editors who cover marketing, brand, and growth. They research each story and publish under a shared desk byline — experts in their fields, working as one team.